Tutorial for Zeiss Axio Imager startup procedure. Image Zeiss Axio Imager Startup (4th floor) Remove cover (do not put the cover on the floor it will get dirty!) Turn on; Camera on top of microscope Microscope power supply Microscope Light source (at plug) CoolLED, bars on display should go solid black Computer (this is needed to power the stage) Open Micromanager 1.4, the shortcut should be on the desktop. Change objectives manually, be sure to click ‘Done’ on the controller unit before focusing. Both sliders should be in to view down the eyepieces, pull the top slider out to move to the top camera. This article was published on 2024-06-17